EasyManua.ls Logo

Hirschmann HiSecOS EAGLE20 - Page 233

Hirschmann HiSecOS EAGLE20
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Network > Connections
Virtual Private Network
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
233
Source Address
(CIDR)
Displays the IP address of the source host with the netmask entered in
CIDR notation. When the device forwards packets containing this source
IP address over a VPN tunnel, it applies the settings specified in this row.
Furthermore, the device applies the associated IPsec and IKE-SA
settings, to every IP packet it forwards containing this address.
The keyword
any
means that the device applies the settings in this row to
every packet it forwards.
Possible values:
valid IP address with netmask in CIDR notation (a.b.c.d/n) (default
setting:
any
)
Source Restrictions Displays the optional source restrictions using names or numbers entered
as <protocol/port>. The device sends only the type of data specified
through the VPN tunnel. For example
tcp/http
which is equal to
6/80
,
udp
which is equal to
udp/any
or
/53
which is equal to
any/53
.
Possible values:
<blank> (default setting)
The device uses
any/any
as the restriction.
alphanumeric ASCII character string with 0..32 characters
Destination
Address (CIDR)
Displays the IP address of the destination with the netmask entered in
CIDR notation. When the device forwards packets containing this
destination IP address over a VPN tunnel, it applies the settings specified
in this row. Furthermore, for every IP packet the device forwards
containing this address, it applies the associated IPsec and IKE-SA
settings.
The keyword
any
means that the device applies the settings in this row to
every packet it forwards.
Possible values:
valid IP address with netmask in CIDR notation (a.b.c.d/n) (default
setting:
any
)
Destination
Restrictions
Displays the optional destination restrictions using names or numbers
entered as
<protocol/port>
. The device accepts only the type of data
specified from the VPN tunnel. For example
tcp/http
which is equal to
6/80
,
udp
which is equal to
udp/any
or
/53
which is equal to
any/53
.
Possible values:
<blank> (default setting)
The device uses
any/any
as the restriction.
alphanumeric ASCII character string with 0..32 characters
Parameters Meaning

Table of Contents

Related product manuals