Switching > Filter for MAC Addresses
Switching
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
251
Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
In the "VLAN ID" field, you specify the ID of the VLAN.
In the "Address" field, you specify the destination MAC address.
In the "Possible Ports" field, you specify the device port.
– Select one port if the destination MAC address is a unicast
address.
– Select one or more ports if the destination MAC address is a
multicast address.
– Select no port to create a discard filter. The device discards data
packets with the destination MAC address specified in the table
entry.
Edit Entry Opens the "Edit Entry" window.
The "Possible Ports" field displays the available ports.
The "Dedicated Ports" field displays the ports that are assigned to the
MAC address.
Buttons:
– > : Moves the highlighted entries from the "Possible Ports"
field to the "Dedicated Ports" field.
– >> : Moves every entry to the "Dedicated Ports" field.
– < : Moves the highlighted entries from the "Dedicated Ports"
field to the "Possible Ports" field.
– << : Moves every entry to the "Possible Ports" field.
Reset MAC
Address Table
Removes the MAC addresses from the forwarding table that have the
value
learned
in the "Status" field.
Help Opens the online help.
To Next Page
Loading...