Routing > ARP > Global
Routing
290
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Total entry peak
count
Displays how many entries the ARP table has already contained at a
maximum.
The count is reset to
0
when you reset the ARP table, see "Reset ARP
Table" button in the
Routing > ARP > Current
dialog.
Static entry current
count
Displays the number of statically configured entries the ARP table
contains at the moment; see the
Routing > ARP > ARP Static
dialog.
Static entry max
count
Displays the number of statically configured entries the ARP table can
contain at a maximum.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...