Hirschmann HiSecOS EAGLE20 - Page 329

Routing > OSPF > Ranges
Routing
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
329
 Buttons
Netmask Displays the subnet mask that pertains to the network or subnetwork.
Possible values:
 Valid IPv4 netmask
Effect Specifies the external advertisement of the subnetwork ranges.
Possible values:
 advertiseMatching (default setting)
The router advertises the range in other areas.
 doNotAdvertiseMatching
The router withholds range advertisement to other external areas.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
 Specifies the "Area ID" for the new table entry.
Possible values:
– Valid IP address
 Specifies the IP address of the "Network" or subnetwork of the range.
Possible values:
– Valid IP address
 Specifies the "Netmask" that pertains to the network or subnetwork.
Possible values:
– Valid IP mask
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning