Hirschmann HiSecOS EAGLE20 - Page 354

Routing > Tracking > Configuration
Routing
354
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Ping Timeout [ms] Specifies the period in milliseconds for which the device waits for a
response. If the device does not receive a response within this period, the
device evaluates this as a missed response – see the "Ping Replies to
lose" field.
Possible values:
 10..10000 (default setting: 100 )
If a large number of ping tracking objects is set up in the device,
specify the value sufficiently large. When more than 100 instances are
present, specify at least 200 ms.
 – (No tracking object of the ping type)
Ping TTL Specifies the TTL value in the IP header with which the device sends the
ping request packets.
TTL (Time To Live, also known as “Hop Count”) identifies the maximum
number of steps an IP packet is allowed to perform on the way from the
sender to the receiver.
Possible values:
 –
No tracking object of the ping type
 1..255 (default setting: 128 )
Best Route Displays the number of the router interface via which the best route leads
to the monitoring router or end device.
Possible values:
 <Port number>
Number of the router interface.
 no Port
No route exists.
 –
No tracking object of the ping type.
Logical Operand A Specifies the first operand of the logical link for tracking objects of the
logical type.
Possible values:
 Tracking objects set up
 – (No tracking object of the logical type)
Logical Operand B Specifies the second operand of the logical link for tracking objects of the
logical type.
Possible values:
 Tracking objects set up
 – (No tracking object of the logical type)
Operator Links the tracking objects specified in the "Logical Operand A" and
"Logical Operand B" fields.
Possible values:
 and
Logical AND link
 or
Logical OR link
 – (No tracking object of the logical type)
Parameters Meaning