Routing > NAT > Double NAT > Rule
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
411
Remote External IP
Address
Specifies the virtual IP address in the first network for the device placed in
the second network.
Possible values:
Valid IPv4 address
The device applies the NAT rule exclusively to data packets
containing the source address specified here.
Log Activates/deactivates the logging in the log file (system log).
Possible values:
marked
Logging is activated.
The device places an entry in the log file (system log) when it applies
the rule to a data packet.
unmarked
(default setting)
Logging is deactivated.
Trap Activates/deactivates the sending of SNMP traps when the rule is applied
to data packets.
Possible values:
marked
The device sends an SNMP trap when it applies the rule to a data
packet.
unmarked
(default setting)
The sending of SNMP traps is deactivated.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps)
dialog and
specify at least 1 SNMP manager.
Active Activates/deactivates the rule.
Possible values:
marked
The rule is active.
unmarked
(default setting)
The rule is inactive.
Parameters Meaning
To Next Page
Loading...