Hirschmann HiSecOS EAGLE20 - Page 430

Diagnostics > Status Configuration > Security Status
Diagnostics
430
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Buttons
Link interrupted on
enabled device
ports
Activates/deactivates the monitoring of the link on the active ports.
Possible values:
 marked
Monitoring is active.
The "Security Status" changes to "Error" if the link interrupts on an
active port. In the "Port" tab, you have the option of selecting the ports
to be monitored individually.
 unmarked (default setting)
Monitoring is inactive.
Write access using
HiDiscovery
possible
Activates/deactivates the monitoring of the HiDiscovery function.
Possible values:
 marked (default setting)
Monitoring is active.
The "Security Status" changes to "Error" when the HiDiscovery
function is enabled and in the "Access" field the value
readWrite is
selected.
 unmarked
Monitoring is inactive.
You enable/disable the HiDiscovery function in the
Basic Settings >
Network dialog.
Self-signed HTTPS
certificate present
Activates/deactivates the monitoring of the HTTPS certificate.
Possible values:
 marked (default setting)
Monitoring is active.
The "Security Status" changes to "Error" if the HTTPS server uses a
self-created digital certificate.
 unmarked
Monitoring is inactive.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Help Opens the online help.
Parameters Meaning