Diagnostics > LLDP > Configuration
Diagnostics
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
457
Table
Transmit Delay [s] Displays the delay in seconds for transmitting successive LLDP data
packets after configuration changes in the device occur.
Notification Interval
[s]
Specifies the interval in seconds for transmitting LLDP notifications.
Possible values:
5..3600
(default setting:
5
)
After transmitting a notification trap, the device waits for a minimum of the
time specified here before transmitting the next notification trap.
Parameters Meaning
Port Displays the number of the device port.
Admin Status Specifies whether the device port transmits and receives LLDP data
packets.
Possible values:
Transmit
The device port transmits LLDP data packets but does not save any
information about neighboring devices.
Receive
The device port receives LLDP data packets but does not transmit any
information to neighboring devices.
Receive and Transmit (default setting)
The device port transmits LLDP data packets and saves information
about neighboring devices.
Disabled
The device port does not transmit LLDP data packets and does not
save information about neighboring devices.
Notification Enabled Activates/deactivates the LLDP notifications on this port.
Possible values:
marked
LLDP notifications are active on this port.
unmarked
(default setting)
LLDP notifications are inactive on this port.
Transmit Port
Description
Activates/deactivates the transmitting of a TLV (Type Length Value) with
the port description.
Possible values:
marked
(default setting)
The transmitting of the TLV is active.
The device transmits the TLV with the port description.
unmarked
The transmitting of the TLV is inactive.
The device does not transmit a TLV with the port description.
Parameters Meaning
To Next Page
Loading...