Basic Settings > Load/Save
Basic Settings
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
49
Selected Displays whether the configuration profile is designated as “Selected”.
Possible values:
marked
The configuration profile is designated as “Selected”.
– The device loads the configuration profile into the volatile memory
(
RAM
) during a restart or when applying the function "Undo
Modifications of Configuration".
– When you click "Save", the device saves the temporarily saved
settings in this configuration profile.
unmarked
Another configuration profile is designated as “Selected”.
To designate another configuration profile as “Selected”, you highlight the
desired configuration profile in the table and click "Activate".
Encrypted Displays whether the configuration profile is encrypted.
Possible values:
marked
The configuration profile is encrypted.
unmarked
The configuration profile is unencrypted.
You activate/deactivate the encryption of the configuration profile in the
"Configuration Encryption" frame.
Encryption Verified Displays whether the password of the encrypted configuration profile
matches the password stored in the device.
Possible values:
marked
The passwords match. The device is able to unencrypt the
configuration profile.
unmarked
The passwords are different. The device is unable to unencrypt the
configuration profile.
Software Version Displays the version number of the device software that the device ran
when it saved the configuration profile.
Parameters Meaning
To Next Page
Loading...