Time > NTP > Global
Time
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
73
The device transmits the time information without authentication in the
management VLAN as well as in layer 3 on the IP interfaces set up.
Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
To Next Page
Loading...