Hirschmann HiSecOS EAGLE20 - Page 75

Time > NTP > Server
Time
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
75
 Buttons
Status Displays the synchronization status.
Possible values:
 disabled
No server available.
 notSynchronized
The server is available. The server itself is not synchronized.
 notResponding
The server is available. The device does not receive time information.
 synchronizing
The server is available. The device receives time information.
 synchronized
The server is available. The device has synchronized its clock with the
server.
 genericError
Device-internal error.
Active Activates/deactivates the connection to the NTP server.
Possible values:
 unmarked
The connection to the NTP server is deactivated.
 marked
The connection to the NTP server is activated.
– The NTP client of the device obtains the time information from the
unicast responses of this server.
– This server participates in a cluster if the NTP server of the device
is working in
symmetric mode.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Create Adds a new table entry.
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning