Installation MS20/MS30
Release
11
07/2013
15
1 Description
1.1 General device description
Figure 1: MICE basic module equipped with media modules
1 - basic module
2 - media module
3 - slot for media module
You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:
Number of ports
Transmission speed
Temperature range
Voltage range
Certifications
Software variant
The MS20/MS30 devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
provide long-term reliability and flexibility.
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard.
The devices work without a fan.
The following installation options are available:
simply snapping them onto a DIN rail
The redundancy concept allows the network to be reconfigured quickly.
There are convenient options for managing the device. Administer your
devices via:
a Web browser
Telnet
To Next Page
Loading...
Need help?
General
