Installation MS20/MS30
Release
11
07/2013
3
Contents
Safety instructions 5
About this Manual 14
Legend 14
1 Description 15
1.1 General device description 15
1.2 Device name and product code 16
1.3 Description of the device variants 17
1.3.1 Number of ports and connections 18
1.3.2 Media modules 21
1.3.3 Digital I/O Module MM24 25
1.3.4 MB20 extender module 26
1.3.5 SFP Transceiver 26
1.4 Display elements 26
1.4.1 Device status 28
1.4.2 Display status 29
1.4.3 Port status 29
2 Assembly and start-up 31
2.1 Unpacking and checking 31
2.2 Installing the media modules 32
2.3 Filling out and attaching labels 32
2.4 Installing the SFP transceivers (optional) 33
2.5 Adjusting the DIP switch settings on the basic module (4-pin
DIP switch) 34
2.6 Adjusting the DIP switch settings on the MS20/MS30-...E...
basic module (3-pin DIP switch) 35
2.7 Adjusting the DIP switch settings on the
MM20-A8A89999SAHH media module 37
2.8 Connecting the MM22-T1T1T1T1 PoE media module 37
2.9 Terminal block for supply voltage and signal contact 39
2.9.1 Supply voltage 39
2.9.2 Signal contacts 39
To Next Page
Loading...
Need help?
General
