Hirschmann MICE MS20-0800 Series - Page 22

22
Installation MS20/MS30
Release 11 07/2013
They differ with regard to the number of interfaces and the media type. The
different interfaces of the media modules provide you with the following
interface-specific functions:
 Specific functions of TP/TX interface
 Link Control
 Auto Polarity Exchange
 Autonegotiation
 Autocrossing (device may be connected with a crossed-over or an un-
crossed cable)
 Specific functions of F/O interface
 Link Down monitoring
 Transceiver-specific (AUI-specific) functions
 Collision recognition
 Collision test (SQE)
 Protection from permanent network connection (Jabber Control)
 DTE Power Monitor
 MM2 media modules
MM2 media modules
Module type
TP ports
10/100
Mbit/s
F/O port
multi-mode
10 Mbit/s
F/O port
multi-mode
100 Mbit/s
F/O port
single-
mode 1300
nm, 100
Mbit/s
F/O port
single-
mode 1550
nm, 100
Mbit/s
MM2 - 4TX1 (- EEC)4, RJ45––––
MM2 - 2FLM4 – 2, ST – – –
MM2 - 4FXM3 – – 4, MTRJ – –
MM2 - 2FXM3 / 2TX1 2, RJ45 – 2, MTRJ – –
MM2 - 2FXM2 – – 2, DSC – –
MM2 - 2FXS2 – – – 2, DSC –
Table 3: Media connections per MM2 media modules (number and type)