68
Installation MS20/MS30
Release
11
07/2013
The device generally fulfills the norms and standards named in their
current versions.
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity for industrial environments
EN 61131-2 Programmable controllers – Part 2: Equipment requirements and
tests
FCC 47 CFR Part 15 Code of Federal Regulations
German Lloyd Classification and Construction Guidelines VI-7-3 Part 1 Ed.2003
IEC/EN 61850-3 Communication networks and systems in substations – Part 3:
General requirements
IEEE 802.1 D Switching, GARP, GMRP, Spanning Tree
Media access control (MAC) bridges (includes IEEE 802.1p
Priority and Dynamic Multicast Filtering, GARP, GMRP)
IEEE 802.1 Q Tagging
Virtual Bridged Local Area Networks (VLAN Tagging, GVRP)
IEEE 802.1 w Rapid Reconfiguration
IEEE 802.3 Ethernet
ISA 12.12.01, CSA C22.2
No. 213
Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified)
Locations
Korean Register of Shipping Rules for the Classification of Steel Ships – KR
UL 508 Safety for Industrial Control Equipment
a. Devices with C specification (see product code position 16 in table 1)
(MS20-0800ECCP, MS20-1600ECCP)
b. Restriction: Electrical isolation on voltage input: see table entry
„Isolating voltage between operating voltage connec-tors and housing“ in chapter
“Technical data” on page 52
RFC 768 UDP RFC 1769 SNTP
RFC 783 TFTP RFC 1907 MIB2
RFC 791 IP RFC 1945 HTTP/1.0
RFC 792 ICMP RFC 2131 DHCP
RFC 793 TCP RFC 2132 DHCP Options
RFC 826 ARP RFC 2236 IGMPv2
RFC 951 BOOTP RFC 2239 MAU-MIB
RFC 1112 IGMPv1 RFC 3411 SNMP Framework
RFC 1157 SNMPv3 RFC 3412 SNMP MDP
RFC 1155 SMIv1 RFC 3413 SNMP Applications
RFC 1213 MIB2 RFC 3414 SNMP USM
RFC 1493 Dot1d RFC 3415 SNMP VACM
RFC 1542 BOOTP Extensions RFC 2613 SMON
RFC 1757 RMON RFC 2674 Dot1p/Q
Table 25: List of RFCs
Name
Table 24: List of norms and standards
To Next Page
Loading...
Need help?
General
