Installation Octopus II
Release
06
10/2018
23
7 Optional:
Uplink ports 1 and 2
7a Twisted-pair ports are located on the front of the device:
Alternatively:
Data rate characteristic value 2
10/100 Mbit/s twisted pair port
4-pin, “D”-coded M12 socket
Optionally exclusively on port 2:
PoE(+) support
Alternatively:
Data rate characteristic value 3
10/100/1000 Mbit/s twisted pair port
8-pin, “X”-coded M12 socket
Optionally exclusively on port 2:
PoE(+) support
7b F/O ports are located on the bottom of the device:
Alternatively:
Data rate characteristic value 2
100 Mbit/s F/O port
Version:
See table 8 on page 19.
Alternatively:
Data rate characteristic value 3
1000 Mbit/s F/O port
Version:
See table 8 on page 19.
8 alternatively, depending on device variant
Supply voltage with the characteristic value BB or HH
Connection for the power supply including signal contact
5-pin M12 connector
Supply voltage with characteristic value FF, M9, N9, QQ or PP
Connection for the signal contact
5-pin M12 connector
Note: The supply voltage connection is on the bottom of the
device.
9 Ground connection
10 5-pin, “A”-coded M12 socket for USB interface
11 4-pin, “A”-coded M12 socket for V.24 interface
12 Label area for IP address of device
13 Product code
Table 10: Description of the device view
To Next Page
Loading...
