Hirschmann Octopus II - 1 Description

Installation Octopus II
Release 06 10/2018
3
Contents
Safety instructions 5
About this manual 12
Key 13
1 Description 14
1.1 General description 14
1.2 Device name and product code 14
1.3 Device view 21
1.4 Power supply 24
1.4.1 Supply voltage with the characteristic value BB 24
1.4.2 Supply voltage with the characteristic value FF 24
1.4.3 Supply voltage with the characteristic value HH 24
1.4.4 Supply voltage with the characteristic value M9 24
1.4.5 Supply voltage with the characteristic value N9 24
1.4.6 Supply voltage with the characteristic value QQ 24
1.4.7 Supply voltage with the characteristic value PP 25
1.5 Ethernet ports 25
1.5.1 Twisted pair 25
1.5.2 Support of PoE(+) 26
1.5.3 Optical fiber 28
1.5.4 Pin assignments 29
1.6 Display elements 30
1.6.1 Device state 30
1.6.2 Port status 31
1.7 Management interfaces 31
1.7.1 USB interface 31
1.7.2 V.24 interface (external management) 32
1.8 Signal contact 33
2 Installation 34
2.1 Checking the package contents 34
2.2 Installing and grounding the device 34
2.2.1 Installing the device 34
2.2.2 Grounding the device 35
2.3 Connecting the ferrite 36
2.4 Connecting the power supply and the signal contact lines 36
2.4.1 Supply voltage with the characteristic value BB 36