24
Installation Octopus II
Release
06
10/2018
1.4 Power supply
1.4.1 Supply voltage with the characteristic value BB
A 5-pin M12 plug is available for the redundant supply to the device.
Further information:
“Supply voltage with the characteristic value BB” on page 36
1.4.2 Supply voltage with the characteristic value FF
A 5-pin 7/8" plug is available for the redundant supply to the device.
Further information:
“Supply voltage with the characteristic value FF” on page 38
These device variants support PoE(+).
Further information:
“Support of PoE(+)” on page 26
1.4.3 Supply voltage with the characteristic value HH
A 5-pin M12 plug is available for the redundant supply to the device.
Further information:
“Supply voltage with the characteristic value HH” on page 38
1.4.4 Supply voltage with the characteristic value M9
A 3-pin 7/8" plug is available for the power supply to the device.
Further information:
“Supply voltage with the characteristic value M9” on page 39
These device variants optionally support PoE(+).
Further information:
“Support of PoE(+)” on page 26
1.4.5 Supply voltage with the characteristic value N9
A 4-pin 7/8" plug is available for the power supply to the device.
Further information:
“Supply voltage with the characteristic value N9” on page 39
These device variants optionally support PoE(+).
Further information:
“Support of PoE(+)” on page 26
1.4.6 Supply voltage with the characteristic value QQ
A 4-pin, “T”-coded M12 power plug is available for the redundant supply of
the device.
Further information:
To Next Page
Loading...
