34
Installation Octopus II
Release
06
10/2018
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:
Checking the package contents
Installing and grounding the device
Connecting the power supply and the signal contact lines
Operating the device
Connecting data cables
Filling out the inscription label
Making basic settings
2.1 Checking the package contents
Proceed as follows:
Check whether the package includes all items named in the section
“Scope of delivery” on page 60.
Check the individual parts for transport damage.
2.2 Installing and grounding the device
2.2.1 Installing the device
WARNING
ELECTRIC SHOCK
Exclusively for device variants featuring supply voltage with characteristic
value M9 or N9:
Install this device solely in a switch cabinet or in an operating site with
restricted access, to which maintenance staff have exclusive access.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
To Next Page
Loading...
