28
Installation Octopus II
Release
06
10/2018
1.5.3 Optical fiber
The product code tells you which properties your device has.
See “Device name and product code” on page 14.
100 Mbit/s F/O port
The 100 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
Full duplex mode
1000 Mbit/s F/O port
The 1000 Mbit/s F/O port offers you the ability to connect network
components according to the IEEE 802.3 1000BASE-SX/1000BASE-LX
standard.
This port supports:
Full duplex mode
V1: IP67 plug as per IEC 61076-3-106, variant 1
V4: IP67 connector as per IEC 61076-3-106, variant 4
Q-ODC®: HUBER + SUHNER
Table 12: Versions of F/O ports in the Octopus II devices
To Next Page
Loading...
