Hirschmann Octopus II - 7 Technical data; 7.1 General technical data

Installation Octopus II
Release 06 10/2018
49
7 Technical data
 General technical data
Dimensions
W × H × D
Octopus II See “Dimension drawings” on page 53.
Weight Devices with 24 or 28
Fast Ethernet ports
approx. 4.3 kg
Other devices approx. 7.7 lb (3.5 kg)
Mounting Flat surface mounting
Screw type M5
Power supply
Supply voltage with the
characteristic value BB
Rated voltage 24 V DC
Voltage range incl.
maximum tolerances
16.8 V DC ... 32 V DC
Connection type 5-pin M12 connector
Tightening torque 5.3 lb-in (0.6 Nm)
Power loss buffer >10 ms at 20.4 V DC
Overload current
protection at input
Non-replaceable fuse
Back-up fuse for each
voltage input
Nominal rating: 2 A
Characteristic: slow blow
Peak inrush current <2 A
Power supply
Supply voltage with the
characteristic value HH
Rated voltage range 36 V DC ... 48 V DC
Voltage range incl.
maximum tolerances
25.2 V DC ... 60 V DC
Connection type 5-pin M12 connector
Tightening torque 5.3 lb-in (0.6 Nm)
Power loss buffer > 10 ms at 30.6 V DC
Overload current
protection at input
Non-replaceable fuse
Back-up fuse Nominal rating: 2 A
Characteristic: slow blow
Peak inrush current <2 A
Power supply
Supply voltage with
characteristic value FF,
QQ
Rated voltage range 24 V DC ... 48 V DC
Voltage range incl.
maximum tolerances
16.8 V DC ... 60 V DC
Max. PoE power 60 W
Connection type Characteristic value FF
5-pin 7/8" plug
Tightening torque 22 lb-in (2.5 Nm)
Characteristic value QQ
4-pin, “T”-coded M12 power plug
Tightening torque 5.3 lb-in (0.6 Nm)
Power loss buffer >10 ms at 20.4 V DC
Overload current
protection at input
Non-replaceable fuse
Back-up fuse Nominal rating: 10 A ... 20 A
Characteristic: slow blow
Peak inrush current <7 A