Installation Octopus II
Release
06
10/2018
61
1 × Device
1 × M12 connector, 5-pin, (M12 socket, “A”-coded)
1 × Exclusively for device variants featuring supply voltage with characteristic
value QQ or PP:
M12 Power connector, 4-pin, “T”-coded
1 × Only for device variants featuring supply voltage with characteristic value FF:
7/8" connectors, 5-pin
Design:
HH - Hirschmann Standard
HA - Hirschmann with angled connector
1 × Only for device variants featuring supply voltage with characteristic value N9:
7/8" connectors, 4-pin
Design:
HH - Hirschmann Standard
HA - Hirschmann with angled connector
1 × Only for device variants featuring supply voltage with characteristic value M9:
7/8" connector, 3-pin
1 × Cable lug for fastening the protective conductor
1 × Exclusively for device variants with characteristic value hardware type 0
(Standard) in connection with supply voltage characteristic values M9, N9 or for
device variants with the supply voltage characteristic value PP:
Ferrite with key
Number Article
To Next Page
Loading...
