24
Installation RSP 20/25/30/35
Release
15
12/2017
1.4 Power supply
You will find information on the characteristic values here:
“Device name and product code” on page 19
1.4.1 Supply voltage with the characteristic value K9
For the power supply of the device, a 3-pin terminal block is available.
Further information:
See “Supply voltage with the characteristic value K9” on page 35.
1.4.2 Supply voltage with the characteristic value KK
For the redundant power supply of the device, two 3-pin terminal blocks are
available.
Further information:
See “Supply voltage with the characteristic value KK” on page 37.
1.4.3 Supply voltage with the characteristic value TT
For the redundant power supply of the device, two 2-pin terminal blocks are
available.
Further information:
See “Supply voltage with the characteristic value TT” on page 40.
1.4.4 Supply voltage with the characteristic value CC
For the redundant power supply of the device, two 2-pin terminal blocks are
available.
Further information:
See “Supply voltage with the characteristic value TT” on page 40.
To Next Page
Loading...
Need help?
General
