Installation RSP 20/25/30/35
Release
15
12/2017
63
9 Underlying technical standards
The device has an approval based on a specific standard only if the approval
indicator appears on the device casing.
The device generally fulfills the technical standards named in their current
versions.
Name
CSA C22.2 No. 142 Canadian National Standard(s) – Process Control Equipment –
Industrial Products
ANSI/ISA-12.12.01 Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified)
Locations
EN 55032 Electromagnetic compatibility of multimedia equipment –
Emission Requirements
EN 60950-1 Information technology equipment – Safety – Part 1: General
requirements
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity for industrial environments
EN 61131-2 Programmable controllers – Part 2: Equipment requirements and
tests
FCC 47 CFR Part 15 Code of Federal Regulations
IEC/EN 61850-3 Communication networks and systems for power utility
automation - Part 3: General requirements.
IEEE 1613 IEEE Standard Environmental and Testing Requirements for
Communication Networking Devices in Electric Power
Substations
IEEE 802.1AB Station and Media Access Control Connectivity Discovery
IEEE 802.1D MAC Bridges (switching function)
IEEE 802.1Q Virtual LANs (VLANs, MRP, Spanning Tree)
IEEE 802.3 Ethernet
UL 508 Safety for Industrial Control Equipment
UL 60950-1 Information technology equipment – Safety – Part 1: General
requirements
NEMA TS 2 Traffic Controller Assemblies with NTCIP Requirements
(environmental requirements)
Table 15: List of the technical standards
To Next Page
Loading...
Need help?
General
