Do you have a question about the Hirschmann solarus and is the answer not in the manual?
Light Source | Xenon arc lamp |
---|---|
Category | Solar Simulator |
Beam Size | 100 x 100 mm |
Irradiance Range | 1000 W/m² |
Cooling | Air |
Temporal Stability | ±1% |
Replacing clear window with colored for light-sensitive media.
Connecting the suction tube to the reservoir bottle.
Connecting the recirculation tube to the valve block.
Connecting the discharge tube assembly.
Attaching the device securely onto the reagent bottle.
Rotating the device to align with the bottle label.
Removing the closure cap from the discharge tube before titration.
Purging air bubbles from the burette cylinder.
Filling the burette cylinder with the reagent.
Performing the titration by dispensing liquid.
Adjusting display settings for volume indication.
Calibrating the device for specific applications and conditions.
Performing routine maintenance and cleaning procedures.
Detailed steps for intensive cleaning of the device.
Steps to prepare the device for sterilization.
Dismantling parts for cleaning and sterilization.
Loosening specific valves for disassembly or maintenance.
Executing the steam sterilization procedure for parts.
Reassembling the piston, rack, valve block, and cylinder.
Securing the suction, discharge, and recirculation valves properly.
Completing the assembly of the digital burette.
Replacing the suction valve assembly.
Replacing the discharge valve assembly.
Replacing the recirculation valve assembly.
Conducting a weighing process to test volume accuracy according to DIN standards.
Calculating device accuracy and variation using statistical formulas.
Leakage occurring at the gap between the valve block and valves.
Leakage observed between the discharge tube and the valve.
The device is drawing air into the system.
Leakage at the gap between valve block and recirculation valve.
Leakage between stopcock shaft and valve block.
The dispensed volume is not as expected.
The device screen is not showing any output.