Hisense 12K - Indoor Unit Installation Guide

2.
3.
Do not install the indoor unit in a flammable environment to avoid fire or an explosion.
●Check to ensure that the ceiling slab is strong enough. If not strong enough the indoor units may
fall down on you.
●Do not install the indoor unit outdoors. If installed outdoors, an electric hazard or electric leakage
will occur.
The Tools and Instruments for Installation
The Installation of the Indoor Unit
Number
1
2
3
4
5
6
7
Tool
Standard screwdriver
Vacuum pump
Charge hose
Pipe bender
Adjustable wrench
Tube cutter
Cross head screw-driver
Number
8
9
10
11
12
13
14
Tool
Gradienter
Hammer
Churn drill
Knife or wire stripper
Tube expander
Inner hexagon spanner
Tape measure
Installation and Maintenance
10