EasyManua.ls Logo

Hisun AXIS 110 - Page 79

Hisun AXIS 110
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodic Maintenance and Adjustment 8-17
Changing brake fluid
Brake fluid should be replaced by an
authorized Hisun Authorized service
center
● Replace seals every two years.
● Replace brake hoses every four years.
Minimum fluid mark
When checking brake fluid, make sure the
brake fluid bottle is level. Brake fluid
should be above the minimum mark on the
bottle. Add brake fluid if necessary. Low
or no brake fluid could cause air to enter
the braking system which could cause a
loss of braking ability.
If brake fluid is low, check the brake system
for leaks or brake pads for wear.
Adding or changing brake fluid
Fill with recommended brake fluid.
Recommended brake fluid: DOT 4
Mixed brake fluids can produce chemical
reactions and affect braking function.
Always use the same type of brake fluid
when adding.
Never allow water to enter into the brake
fluid container, doing so could result in air
pockets and brake failure.
Brake fluid can corrode plastic and
painted surfaces. Wipe up any drips or
spills after filling.

Related product manuals