--- 39 ---
11. PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY
11-1. Precautions in Disassembly and Reassembly of the Laser Marker
Do not stare into the laser emitting aperture during disassembly and reassembly of the laser marker. Do not
observe beam directly with an optical instrument. Use of controls or adjustments or performance of procedures
other than those specified in this TECHNICAL DATA AND SERVICE MANUAL and the Instruction Manual may
result in hazardous radiation exposure.
11-2. Disassembly
Special attention in disassembly should be given to the following items. The circled numbers in the figures and
the [Bold] numbers in the descriptions below correspond to the item numbers in the parts list and exploded
assembly diagram of the Model C 12LSH. For the Model C 12RSH, refer to the parts list separately.
* Be sure to first disconnect the power plug when performing disassembly or replacement of the saw blade.
Disassembly procedure
Disassembly
spots
Item
No.
Necessary tools
Fig. 57
1
Turn table, base
ass'y
B
131
132
133
64
136
137
134
135
138
156A
153
154
157
158
159
160
161
162
163
164
140
139
141
142
143
144
145
146
147
148
149
150
151
152
64
166
167
168
169
170
171
172
131
132
322
174
175
176
143
173
146
147
148
134
135
165
335
336
337
To Next Page
Loading...
Need help?
General
