--- 2 ---
NOTE: Numerals in ( ) are identical with item numbers in "4-1. Selling Point Descriptions."
(8)
Digital display panel that
indicates miter/bevel angles
(Only the Model C 12LSH)
To left: H70 mm x W312 mm
(H2-3/4" x W12-1/4")
H75 mm x W260 mm
(H2-15/16" x W10-3/16")
To right: H45 mm x W312 mm
(H1-3/4" x W12-1/4")
H50 mm x W260 mm
(H1-15/16" x W10-3/16")
(3)
(2)
(12)
Miter cutting
(14)
Press cutting
H107 mm x W107 mm
(H4-3/16" x W4-3/16")
(11)
(13)
(5)
High sub fence
(Right and left)
120 mm (4-11/16") in height
(9)
Positive angle stoppers
For easy adjustment of the turn table position for miter cutting
(At the right and left of the 0û center setting,
at 15û, 22.5û, 31.6û and 45ûsettings)
High dust collecting
performance
[ Left 45û, right 57û]
Right and left bevel cutting
Compound (miter + bevel) cutting
To left: H70 mm x W220 mm (H2-3/4" x W8-5/8")
H75 mm x W180 mm (H2-15/16" x W7-1/16")
To right: H45 mm x W220 mm (H1-3/4" x W8-5/8")
H50 mm x W180 mm (H1-15/16" x W7-1/16")
For easier alignment
with the ink line
Laser marker
(4)
Bevel angle fine
adjustment
(7)
Conveniently
positioned bevel
angle locking
mechanism
(10)
Slide cutting
H107 mm x W312 mm
(H4-3/16" X W12-1/4")
H120 mm x W260 mm
(H4-11/16" X W10-3/16")
Powerful 15 amps motor
(for the U.S.A. and Canada)
(15)
(4)
Miter angle fine adjustment
(6)
Aggressive tool design
4. SELLING POINTS
Operable even in tight places because
the depth of the main unit is 930 mm.
(1)
Compact body thanks to
the new sliding system
*
*
*
*
* These numeric values are for the models destined for the U.S.A. and Canada. Refer to "5. SPECIFICATIONS"
as the capacities are different depending on the destinations.
To Next Page
Loading...
Need help?
General
