Hitachi C 12RSH

*
ALTERNATIVE PARTS --- 7 ---
ITEM
NO.
CODE NO.
DESCRIPTION
REMARKS
NO.
USED
PARTS
5 -- 07
C 12LSH
* 190 324-376 LINK 1
* 190 328-522 LINK 1 FOR EUROPE
191 319-270 ADJUSTER 1
192 973-313 NYLON CLIP 1
193 305-180 CLUTCH SCREW 1
194 305-179 CLUTCH SPRING 1
195 962-614 ADJUSTING WASHER (B) T0.5 1
196 319-268 PLATE (B) 1
197 305-179 CLUTCH SPRING 1
198A 321-348 LASER MARKER 1
199 319-267 SPRING 2
200 319-541
SEAL LOCK HEX. SOCKET SET SCREW M5X6 2
201 319-271 COVER (A) 1
202 322-291 PLATE (A) 1
203 CAUTION LABEL (J) 1
204 949-429 BOLT WASHER M4 (10 PCS.) 3
205 949-217 MACHINE SCREW M4X12 (10 PCS.) 3
206 319-267 SPRING 1
207 319-269 HOLDER (B) 1
231 324-446 HANDLE (L) 1
232 305-558
TAPPING SCREW (W/FLANGE) D5X25 (BLACK) 4
* 233 323-978 SWITCHING POWER SUPPLY 1
* 233 322-911 SWITCHING POWER SUPPLY 1 FOR USA, CAN
* 233 324-322 SWITCHING POWER SUPPLY 1 FOR GBR (110V)
234 984-750 TAPPING SCREW (W/FLANGE) D4X16 3
* 235 500-234Z CORD 1 (CORD ARMOR D10.1)
* 235 500-247Z CORD 1
(CORD ARMOR D10.1) FOR NOR, SWE, FIN, DEN
* 235 500-461Z CORD 1 (CORD ARMOR D10.1) FOR GBR (110V)
* 235 500-435Z CORD 1 (CORD ARMOR D10.1) FOR GBR (230V)
* 235 500-447Z CORD 1 (CORD ARMOR D10.1) FOR SUI
* 235 500-453Z CORD 1 (CORD ARMOR D10.1) FOR USA, CAN
* 235 500-439Z CORD 1 (CORD ARMOR D10.1) FOR AUS, NZL
* 235 500-456Z CORD 1 (CORD ARMOR D10.1) FOR CHN
* 235 500-423Z CORD 1 (CORD ARMOR D10.1) FOR SIN, MAL
236 324-422 INTERNAL WIRE (B) 1
237 319-349 CORD BUSH 1
238 324-447 HANDLE (R) 1
239 938-051 CORD ARMOR D10.1 1
240 937-631 CORD CLIP 1
241 301-653
TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 6
242 880-734
MACHINE SCREW (W/WASHERS) M5X25 (BLACK) 5
243 945-161 BRUSH CAP 2
* 244 999-038 CARBON BRUSH (1 PAIR) 2 FOR 110V-120V
* 244 999-065 CARBON BRUSH (1 PAIR) 2 FOR 220V-240V
245 938-241 BRUSH HOLDER 2
* 246 CAUTION LABEL (A) 1 FOR USA, CAN
247 NAME PLATE 1
248 990-541 MACHINE SCREW (W/WASHERS) M5X16 2
249 324-445 TAIL COVER 1
250 938-477 HEX. SOCKET SET SCREW M5X8 2
251 324-444 HOUSING ASS’Y 1 INCLUD. 245, 248-250