1/10 Gb/sec LAN Switch Module
Figure 1-36 1/10 Gb/sec LAN Switch Module
Table 1-19 1/10 Gb/sec LAN Switch Module Switches, Indicators and
Connectors
Location Name State Description
1 LAN ports 1 to 4 Green-On Link established.
Green-Blink Link communication.
Amber-On Link failed.
2 10GBASE-R slots - Slots for 10GBASE-LR or 10GBASE-SR
transceivers. Each slot has both link and
activity LEDs to the side.
3 Memory Card slot (MC) - Slot for an SD memory card.
4 Access LED (ACC) Green-On The SD memory card is accessed.
5 Reset switch (RST) - Press and hold for five seconds to reset
the LAN switch module.
6 LINK LED for XFP Green-On Link established.
Amber-On Link failed.
7 TX/RX LED for XFP Green-On Link communication.
8 Power LED (PWR) Green-On Powered-on, normal operation.
9 Status1 LED (ST1) Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Red-Blink Fault. Max temperature limit exceeded
or other warning.
Red-On Alarm.
10 Identify LED (LOCID) Blue-On The switch module is identified.
System Overview
1-31
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
