Item Description
LP firmware
version
Current Shows the LPAR manager
firmware version assigned to
the target server blade now.
Next Shows the LPAR manager
firmware version assigned to
the target server blade when
the server blade boots next
time.
Backup/
Restore LP
Settings
2
Backup Settings Shows whether LPAR
manager configuration
information is backed up.
Executed: LPAR manager
configuration information is
backed up.
Unexecuted: LPAR manager
configuration information is
not backed up.
Restore Settings Shows whether LPAR
manager configuration
information is restored.
Executed: LPAR manager
configuration information is
restored up.
Unexecuted: LPAR manager
configuration information is
not restored.
Notes:
1. Shows the setting of LPAR manager firmware.
2. Shows whether LPAR manager configuration information is backed up/restored.
Table 2-105 Action button at the bottom
Item Description
Back Returns to the Assign firmware to Server Blade (Operating LPAR manager
configuration information) dialog box.
OK Assigns the LPAR manager firmware to the server blade.
Cancel Cancels the settings and closes the Assign firmware to Server Blade
(Confirming) dialog box.
Tip: The Assign firmware to Server Blade (Selecting LPAR manager F/W
version) dialog box or the Assign firmware to Server Blade(Operating
LPAR manager configuration information) dialog box can be shown by
pressing Back button. However, in the case that Back button is pressed
on the Assign firmware to Server Blade (Operating LPAR manager
configuration information) dialog box, the result whether LPAR manager
configuration information is backed up/restored is cleared. So, in this
Operating the Web Console
2-99
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
