Hitachi Compute Blade 500 Series - Page 110

case, when the Assign firmware to Server Blade (Confirming) dialog box
is shown again, the result will be "Unexecuted".
• Change LP model
Table 2-106 Change LP model items
Item Description
Server Blade No. Selects a server blade to change its LPAR manager
model.
LP model Shows the current license model.
Essential: Can activate up to 4 LPARs; can define up to
4 processor groups, at the same time.
Advanced: Can activate up to 30 LPARs; can define up
to 30 processor groups, at the same time.
License key:
direct input
radio
button
Selects the method to directly type the license key.
text box Type the license key. This box is available only with
License key direct input radio button selected.
License key:
key file
radio
button
Selects a key file from which the license key is read.
This item is available only with License key file radio
button selected.
Browse
button
Selects a key file for the license key. This button is
available only when the key file radio button is
selected.
Table 2-107 Action button at the bottom
Item Description
Confirm Shows the Check result of key dialog box.
Cancel Cancels settings and close the Change LP model dialog box.
Note: In SMP configuration, change LP model of all server blades in the
configuration.
• Check result of license key
2-100
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide