Hitachi Compute Blade 500 Series - Page 118

Item Description
Items are hidden by default, but shown by clicking the underline.
Table 2-117 Action button at the bottom
Item Description
Confirm Shows the Modify LPAR dialog box (confirmation).
Cancel Cancels the settings and returns to the LPAR Information dialog box.
• Set HBA port
Table 2-118 Items in Set HBA port
Item Description
Port Assignment
1
Assign check box Selects HBA ports to assign to the LPAR.
Slot Shows HBA slots on the server blade.
[Management module firmware version A0205
or later]
Shows also the number of a server blade in
the slot.
Controller
number
[Management module firmware version A0240
or later]
Shows controller number.
Scheduling mode [Management module firmware version A0240
or later]
Shows scheduling mode.
Port Shows HBA ports on the server blade.
2-108
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide