Table 2-132 Items in HBA boot settings
Item Description
Priority Shows the priority order after changed.
Before Shows the priority order before changed.
Device type Shows the type of the boot device.
Status Shows the state of the boot device
Name Shows the boot device name.
Slot Shows the card type connected to the boot device
Controller number [Management module firmware version A0240 or later]
Shows the controller number connected to the boot device.
Scheduling mode [Management module firmware version A0240 or later]
Shows the scheduling mode connected to the boot device.
Port Shows the port number connected to the boot device
WWN/MAC Shows the WWN or MAC address assigned to the port
LUN Shows the LU number to be used as a boot device
Table 2-133 Action button at the bottom
Item Description
Back Returns to the HBA boot settings (Configure) dialog box.
OK Saves the new boot order settings and closes the HBA boot settings.
Cancel Cancels the new settings and go back to the LPAR Information dialog box.
2-120
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
