Item Description
Default
Physical MAC
Shows a list of Default Physical MAC addresses, unique to the
fibre channel adapter installed in the server blade. In the
case that a server blade is not installed, Default Physical MAC
is not shown.
Virtual MAC Shows Virtual MAC addresses used in LPAR manager.
Optional Physical MAC
When the primary server blade is selected in SMP configuration, Optional
Physical MAC information of all server blades is shown.
Table 2-183 Optional Physical MAC items
Item Description
Table heading Shows the server blade number and mezzanine card number.
Controller Shows the number of a network controller installed in the mezzanine
card.
Port Shows port numbers.
Modified * is shown only when the Optional Physical MAC address is changed from
the initial value.
MAC address
If the same Optional Physical MAC address exists in the system unit,
is shown on the head of it. Modify the Optional Physical MAC to be unique
using the Edit button.
Operating the Web Console
2-157
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
