Tree configuration Description
Power management Controls power of the entire
system and individual modules:
shows the status of power supply
and consumption, caps power
consumption, and sets power
supply module redundancy.
HA Monitor To use the HA monitor, specify the
settings for linking to the HA
monitor.
Firmware Shows and updates firmware of
server blades and LPARs.
Simultaneously updating firmware
of multiple server blades is
available.
LP License Shows and upgrades an LPAR
manager license.
Security strength settings Configures the security strength
settings for the management
modules and the server blades.
Alerts tab
9
System Event Log Shows system event logs (SEL).
Failed and warning events can
provide details of each event.
Optional Physical WWN Change Log Shows the change log history for
Optional Physical WWN. Optional
Physical WWN is changed at
switching server blades or at
retuning the ex-active blade to be
active by N+M cold standby.
Optional Physical MAC Change Log Shows the change log history for
Optional Physical MAC address.
Optional Physical MAC address is
changed at switching server
blades or at retuning the ex-active
blade to be active by N+M cold
standby.
Operation Log Manages operation logs of
management modules and server
blades (BMC), which can be
downloaded.
MAR Log Lists MAR Log: Maintenance Action
Report logs, which shows events
causing a failure report. Details
can be provided. Logs collected at
a failure can be downloaded.
Environment Log Shows the highest and lowest
inlet/outlet temperatures per day.
The history can be downloaded.
2-8
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
