LP tab
Table 2-201 LP items
Item Description
LP firmware Bank Shows the bank number of LPAR manager firmware.
Firmware version Shows the LPAR manager firmware version installed on the bank.
State Shows whether or not assigned to the server blade.
Table 2-202 Action buttons at the bottom
Item Description
Install
firmware
Installs LPAR manager firmware: Shows the Install firmware dialog box.
[Management module firmware version A0135 or earlier]
In the case that the bank for which State is "-----"(not assigned) is
selected, this button is available.
[Management module firmware version A0145 or later]
In the case that a bank for which State is "-----"(not assigned) or "Assigned
(enable to overwrite firmware)" is selected, this button is available.
Uninstall
firmware
Uninstalls firmware: Shows the Uninstall firmware dialog box. In the case
that the bank which an LPAR manager firmware is installed on and State is
"-----"(not assigned)" is selected for, this button is available.
Tip: The server blade to which a LPAR manager firmware bank is assigned
can be confirmed in Server Blade tab.
2-172
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
