Item Description
Maintenance
mode OFF
Selects a server blade slot and release the slot from maintenance
mode. Release of maintenance mode is done in relation to a server
blade slot. If the slot has a server blade, the server blade is also
released from maintenance mode.
Condition tab
Table 2-22 Condition tab items
Item Description
Server Blade Shows the number of a server blade.
The following icons show a server blade in SMP configuration.
: Primary server blade
: Non-primary server blade
Power Shows a power supply state among the following states:
ON: The server blade is powered on or being powered on including
Smart Configure.
OFF: The server blade is powered off including in sleep state.
-----: No server blade is installed or a non-primary server blade is
installed.
LID Shows an LID (Identification LED) state among the following states.
Operating the Web Console
2-25
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
