Item Description
User account
9
Table 2-47 Server blade Web console items
Item Description
Use Select Disable or Enable. Server blade Web console can be
connected only with https. With this item disabled, BMC will reject
https connection and the remote console will not be available.
Enable login Select Disable or Enable. The default value is Enable. With this
item disabled, https connection is available but login is not.
HTTPS port number Server blade Web console port number: 443
This port number cannot be changed
TLS version TLSv1.0
TLSv1.1
TLSv1.2
Select Disable or Enable.
If a TLS version is disabled, the server blade Web console using
that version cannot be connected.
When security strength is set to high, only TLSv1.2 is enabled
while other versions are fixed: Disable.
Table 2-48 Remote console items
Item Description
Use Select Disable or Enable. With this item disabled, BMC will reject
connection requests from KVM/vMedia clients.
Port number Type the port number to accept connection requests from KVM/
vMedia clients. Specify 5001 or a number between 1024 and
65535 for the port number. See Note below.
TLS
version
TLSv1.0
TLSv1.1
TLSv1.2
Select Disable or Enable.
If a TLS version is disabled, the server blade remote console using
that version cannot be connected.
When security strength is set to high, only TLSv1.2 is enabled
while other versions are fixed: Disable.
Note: The following numbers are not available for the port number to remote
console because they are used for SMASH features.
5985, 5986, 5988, 5989
Table 2-49 IPMI over LAN items
Item Description
Use Select Disable or Enable. With this item
disabled, BMC will discard RMCP/RMCP+
packets.
2-50
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
