Item Description
Port number Shows 623. This port number cannot be
changed.
Connection between IPMI over LAN
v1.5 and null account
(Available only with CB 520H A1/B1,
CB 520A A1, and CB 540A A1/B1)
Select Disable or Enable. If with disabled, no
session can be established via IPMI over LAN
v1.5. Setting null user name and password, and
user authentication using those settings are also
not available.
When security strength is set to high, this item
is fixed: disable.
RMCP+ messaging
cipher suite privilege
levels
(Available only with CB
520H A1/B1, CB 520A
A1, and CB 540A A1/B1)
Cipher suite
ID 0
Select one of the following privileges.
•
Disable
• Callback
• User
• Operator
• Administrator (default)
When security strength is set to high, this item
is fixed: disable.
Cipher suite
ID 3
Select one of the following privileges.
• Disable
• Callback
• User
• Operator
• Administrator (default)
Even if security strength is set to high, you can
select a privilege.
Other cipher
suite IDs
Select Disable, or you can select a privilege
using Get/Set LAN Configuration Parameter
command.
When all cipher suite IDs other than Cipher
suite ID 0 and 3 are disabled, Disable is shown.
If not, executing Get/Set LAN Configuration
Parameter command shows this item.
If you disable this item, all cipher suite IDs
other than Cipher suite ID 0 and 3 are disabled.
When security strength is set to high, this item
is fixed: disable.
Table 2-50 SMASH (WS-Management) items
Item Description
Use Select Disable or Enable. With this item disabled, BMC will reject
connection requests from WS-Management clients.
When security strength is set to high, this item is fixed: disable.
You can enable this afterwards. Connection via TLSv1.0 is available
regardless of TLS version setting.
Operating the Web Console
2-51
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
