Item Description
Port number Type the port number to accept connection requests from WS-
Management clients. Specify a number between 1024 and 65535
for port number.
Leave this number same as the default if you don't use SMASH.
TLS
version
TLSv1.0 Select Disable or Enable. TLSv1.0 and TLSv1.1 can be enabled
even if Security strength is set to High so that clients that does not
support TLSv1.2 can be used.
TLSv1.1
TLSv1.2
Table 2-51 Login banner items
Item Description
Use Select Disable or Enable.
If a Login banner is enabled, a banner message is displayed on the
server blade Web console and SMASH (CLP) before login.
Banner message Specify a banner message for the login banner. The banner message
must be an ASCII string up to 100 lines and 1600 characters.
Table 2-52 SMASH (CLP) items
Item Description
Use Select Disable or Enable. With this item disabled, BMC will reject
connection requests from SSH clients.
Port number Type the port number to accept connection requests from SSH clients.
Specify a number between 1024 and 65535 for port number.
Leave this number same as the default if you don't use SMASH.
Table 2-53 Asset Information items
Item Description
Asset Tag Asset tag for user to define. Up to 63 alphanumeric characters and symbols
can be used.
Table 2-54 TLS version items
Item Description
TLS version
(Available only
with CB 520H B2)
SSLv3 Select Disable or Enable.
If an SSL/TLS version is disabled, the server blade Web
console and remote console using that version cannot be
connected.
When security strength is set to high, only TLSv1.2 is
enabled while other versions are fixed: Disable.
TLSv1.0
TLSv1.1
TLSv1.2
2-52
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
