Item Description
set as 0.0.0.0. If the field is blank, LPAR manager may fail to start
up.
VNIC System No. Specify a VNIC system number.
Note that, in order to prevent MAC address duplication in the shared
NIC and virtual NIC, the VNIC system number is used to generate
MAC addresses.
You need to specify a unique number for all the LP systems,
including Compute Blade Series.
For a VNIC system number, specify a value equal to or greater than
1. The maximum value varies depending on the LP firmware version.
LP ID Defining the ID for LPAR manager authentication.
Set with 16 characters or less. The available characters are
alphanumeric, ~, @, $, #, %, ^, -, +, =, _, ., [, and ].
As a default, a value which figures omitting "." from LP IP address
follow "LP_" is set.
Time zone Sets your time zone.
Table 2-82 Action button at the bottom
Item Description
Confirm Shows the Confirming dialog box.
Cancel Cancels the setting and returns to the LP Setting dialog
box.
LP CLI Settings
Table 2-83 LP CLI Setting items
Item Description
User authentication Enable or disable LP CLI user authentication.
This item is displayed only if the server blade is powered
on.
2-82
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
