PLAYING BACK WIDE-MODE IMAGES ON 4:3 DISPLAY TV (TV TYPE)
If you connect the DVD xideo camera/recorder with a disc recorded in wide mode to a TV with 4:3
display only and play it back, vertically long images will appear. You can specify "TV type: 4:3" to
display 4:3 images on the TV.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 1_141/l,'l,]/'_'q/l_/l_/ll buttons to
choose "TV type" on the "Others" menu
screen, and then press the I_/|| button.
4Choose "4:3", and then press the l_/ll button.
SLIDE SHOW (CONTINUOUS PLAYBACK OF STILLS)
If vou play back stills recorded on a card, the DVD xideo camera/recorder will enter the playback
pause status after each still is played back.
Setting Slide Show allows you to continuously play back stills.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 1_I41/IN_/N/I_I_/II_Ill buttons to
choose "Slide Show", "Start", and then pl_ss
the I_/|| button.
Note:
• With slide show, playback will start from the first photo
on card regardless of the position of cursor or
whether you attempt to select scenes.
• If you press the • button or turn the DVD video
camera/recorder off, Slide Show will be canceled,
H
Start: To start a slide show
When playback is finished, the DVD video
camera/recorder will enter the playback
pause status at the final still.
Pressing the • button will restore the Disc
Navigation screen.
103
To Next Page
Loading...
