|
System Reset
If the DVD video camera/recorder does not operate normally, perform "System Reset": The DVD
video camera/recorder may recover to normal. "System Reset" will reset all settings to factory
defaults. The date and time will also be reset: Set the date and time again before using the DVD
video camera/recorder.
1Set the power switch to "OFF" to turn the
DVD video camera/reorder off.
Detach tile battery o1:AC adapter/charger.
2 Use a fine tipped pen to hold down the reset
button for several seconds.
Note:
• Do not press the reset button with undue force.
• Before pressing the RESET button, be sure to
remove the disc from the DVD video camera/
recorder: Pressing the RESET button with a disc
loaded may erase the scenes recorded on the
disc,
All settings will be reset.
eList of setting items
Camera Functions Program AE Auto p. 56
Setup White Bal. Auto p. 57
EIS On p. 59
Dig.Zoom 120x *t p. 50
MIC.Filter Off p. 59
Record Functions Setup VIDEO Mode FINE p. 60
Quality FINE p. 63
16:9 On p. 61
Self Timer Off p. 63
OSD Output On p. 64
Date Setup Date Set 1/1/2007 12:00AM p. 31
Date Mode M/D/Y p. 31
LCD/EVF Setup LCD Brightness _ p. 34
EVF Brightness _ p. 34
Color Level _ p. 35
EVF Display Auto p. 35
142
To Next Page
Loading...
