Hitachi DZ-GX5080A - CREATING DVD-VIDEO USING IMAGES RECORDED ON DISC

CREATING DVD-VIDEO USING IMAGES RECORDED ON DISC
You can use tile images recorded on the DVD video camera/recorder to create a disc that can be
x iewed on DVD recorders/players.
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalized on this
DVD video camera/recorder (see page 100).
1Insert a disc with tile recorded images to be
saxed into the DVD xideo camera/recorde];
and connect the DVD video camera/recorder
to a USB port of PC.
2 Start hnageMixer 3.
When hnageMixer 3 starts up, the launcher
shown below will appear: Click "Create
DVD-Video'.
Click
Setting up project.
Set up a project. You can set up the
designated save location of edited contents
and image qualit)_
Be sur_ to choose "NTSC" for the video
system.
After setting up the project, click the "OK"
button.
_ro eJ_i_3_t:m,
_otL_t F_la
M_deo Fo_m_t NTSC PAL
P_LWIe _Ju_, ty 5et_lg
pErture QU_IEI Q_ High qu_llt¢ 0 Standard _u_llt
3 Click "Create New DVD'.
Click
5 The screen for choosing the device to be read
will appear: Choose "Hitachi DVDCAM'.
A list of devices that are built into or
connected to PC will appear: Choose "Hitachi
DVDCAM', and then click "Import".
I
Click
119