Adjusting Brightness of Image to be recorded
(Exposure)
The DVD video camera/recorder usually adjusts the exposure automatically You can also manually
adjust the exposure depending on the recording conditions.
1Press the EXPOSURE button during
recording.
The exposure adjustment bar will appear on
tire screen.
Exposure adjustment bar-- _ ......
2 Use the <<1 / _ buttons to adjust the
exposure_ , while _ iewing, the image in the
_ iewfinder o]: on the LCD screen.
Adjust with _ /_ buttons
Note:
• Pressing EXPOSURE will alternate between manual
adjustment and auto exposure. With auto exposure,
no indication will appear on the screen.
• The exposure setting will return to Auto when the
DVD video camera/recorder is turned off.
Compensating for Backlight
When subject is lighted from rear, this function will compensate for lighting so that the subject is not
too dark.
Note:
• Pressing the BLC button will alternate between
backlight setting between on and off.
• The backlight setting will automatically return to "off"
when the DVD video camera/recorder is turned off.
1Press the BLC button during recording.
REM_0 MI.
Backlightcorrection icon
_,ooaM
The backlight correction icon will appear.
54