Hitachi DZ-GX5080A - PLAYING BACK PROGRAM (PLAY); CHANGING TITLE OF PROGRAM (TITLE)

|
PLAYING BACK PROGRAM (PLAY)
You can play back only the selected program.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3Use the 1_14/),'l_l/'ql_l/)Hl_/l_/ll buttons to
choose "Play" on the "Program" menu
screen, and then press the I)'/11 button.
4Select the program to be played back, and
then press the I_/|| button.
Playback will start from the first scene of the
selected program.
Note:
If "Repeat Play: On" is specified, the selected program
will be repeatedly played back (PLAYING BACK
SCENES REPEATEDLY (REPEAT PLAY), p. 102).
CHANGING TITLE OF PROGRAM (TITLE)
The recording date/time has initially been attached to anv_ program.,
You can change the recording date/time to anv desired title.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3Choose "Title" on the "Program" menu
screen, and then press the I1,,/|| button.
4Select the progranr
whose title you want to
change, and then press
the I_/11 button.
6After entering the title,
choose "Enter" and
then press the 1_/11
button.
7The screen for verifying
the change in title will
appear: Choose "YES",
and then press the I_/||
button.
The screen for setting a title will appear.
5 Use 1_I41/I)IH/_/_I)
to select a letter, and
then press the II_/ll
button: The selected
letter will be entered.
Title input bar
Choose "NO" to cancel changing of the title.
After Yes or No setting, the Disc Navigation
screen of the selected program will appear.
Repeat this procedure
to create a title.
Up to 20 characters can
be input.
Palette for selecting
characters
88