Program
WHAT IS "PROGRAM"?
Program refers to an assembly of scenes recorded on the same date regardless of whether they are
movie o]: still.
Scene No. 1 Scene No. 2 Scene No. 3 Scene No. 4 Scene No. 5 Scene No. 6
,_>c-s,_s,_-" t_2,o _T2_ .... _J_
Program No. 1
Recorded on February 10
SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)
Since the scenes recorded on this DVD video camera/recorder are collected as "programs" for each
recording date, selecting a program will allow you to display only the scenes on a specific date.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 14</),H/<</I_/IWII buttons to
choose "Select" on the "Progranr" menu
screen, and then press the IWII button.
4Select the program to
be displayed, and then
press the )"/11 button.
Note:
• Pressing the • button on the "Select Program" screen
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the program may not be
a collection of recordings on the same date,
• If you change the video quality or switch the wide
mode with a +RW, multiple programs will be produced
even if they are recorded on the same date,
The Disc Navigation
screen of the selected
program will appear.
02007 001'0081
F_pta_ _
87
To Next Page
Loading...
