OSwitching the information display mode
You can switch the display mode of on-screen information:
Press tile DISPLAY button.
Tile full and minimum display modes will alternate.
• Full display mode: All types of information will
appeal_
• Minimum display mode: The recording mode (see
1 on page 43) and recording status (see 10 on
page 43) will appeal_ If the DVD video camera/
recorder has warning information, a warning message will appear.
Note:
The DVDvideo camera/recorder does not record the date and time as a part of image. However,this information
during recording will be recorded with image as data which can be checkedon Disc Navigation screenduring
playback (see "INFORMATION DISPLAYDURING RECORDING"on page 43),
ODisplay when recording an image of yourself
When recording with the LCD screen facing the same direction as the
lens, the operating status will appear: The battery remaining level will
appear only when the remaining level is very lo_x; and the display will
blink.
Operating status/warning message --
Battery remaining level --
No warning/message (see page 43) will appear when recording with the LCD screen facing the same
direction as the lens.
lnstead, the following screen display symbols will blink to inform you of the operation status of
DVD video camera/recorder.
When the LCD monitor is turned 180° from the position with the LCD screen facing the same
direction as the lens, the warning/message can be checked.
46
To Next Page
Loading...
